> menu uitklappen <
algemeen
apparatuur foto's
APRS
banden
componenten
connectoren
documentatie
elektronenbuizen
filters/combiners
surplus (defensie)
surplus (industrie)
surplus (telefonie)
mechanica
meetapparatuur
tijdstandaard/GPSDO/OSC
meetapparatuur (info)
modificaties
naslagwerk
projecten
publicaties
modems/trackers
antennetuners
antennes
voedingen
(zend)ontvangers
Baofeng UV-5R
Icom IC-2e
Icom IC-705
Icom IC-706
Icom IC-7100
Icom IC-7300
Kenwood TH-D7E
Kenwood TS-830M
QYT KT-8900
Telefunken ELK 639
Triple-P TXU-1256 repeater
Wouxun KG-UVD1P
Wouxun speakermike
Yaesu FT-101E
Yaesu FT-1500M
Yaesu FT-1802
Yaesu FT-2000
Yaesu FT-2800M
Yaesu FT-3D portofoon
Yaesu FT-7800
Yaesu FT-817
Yaesu FT-857(D)
Yaesu FT-897(D)
Yaesu FT-8x7 serie
Yaesu FT-991
Yaesu FTM-100
reparaties
schakelingen
theorie
gereedschap
EMC/EMI
werkplek
veiligheid
avionica
overig
|
FT-857(D)
|
inleiding FT-857(D) Hieronder staat diverse informatie over de Yaesu FT-857D zendontvanger.
Specificaties Type: Amateur HF/VHF/UHF transceiver Frequency range: - TX: 10-160 m + WARC / 6 m / 2 m / 70 cm - RX: 0.1-76 / 108-174 / 420-512 MHz Mode: AM/FM/SSB/CW and WFM (RX only) RF Power output: - 6-160 m: 100 W - 2 m: 50 W - 70 cm: 20 W Sensitivity: N/A Selectivity: N/A Image rejection: N/A Voltage: 13.8 VDC Current drain: - RX: 0.6-1 A - TX: Max 22 A Impedance: 50 ohms, 2*SO-239 Dimensions (W*H*D): 155*52*233 mm Weight: 2.1 Kg Manufactured: 2003-2004 Other: - Built-in keyer - Beacon mode - 32 color display - CTCSS - 200 memories - Detachable front panel - DSP option
Ultra Compact Design Measuring just 155 x 52 x 233 mm, the FT-857 is the worlds smallest full-power HF/VHF/UHF multimode transceiver! Its rugged case design is a masterpiece of ergonomic design, with often-used switches and knobs conveniently positioned for easy access.
High-Performance Receiver Design Building on the acclaimed performance of the FT-1000D, Mark-V FT-1000MP, and FT-897, Yaesus engineers have crafted the FT-857s front end for a very low noise floor, along with wide dynamic range. Utilizing an up-conversion architecture for HF with a first IF of 68.33 MHz, the FT-857 features a double-conversion superheterodyne system (triple conversion on FM), with the 2nd IF at 10.7 MHz. Extensive bandpass filtering in the front end, along with careful device selection and gain distribution, yield a receiver system ready for the strong-signal challenges of todays crowded bands!
Wide Frequency Coverage Providing transmitter coverage of the HF, 50 MHz, 144 MHz, and 430 MHz Amateur bands, the FT-857 also includes receive coverage on 100 kHz to 56 MHz, 76 to 108 MHz, 118-164 MHz, and 420-470 MHz. Enjoy the excitement of public safety monitoring, along with weather broadcasts, AM and FM broadcasts, aviation communications, as well as the action on the Ham bands!
Versatile Memory System The FT-857 provides up to 200 "Main" memory channels, each of which may be named with an Alpha-Numeric label of up to eight characters. These 200 Memories may be separated into as many as 10 Memory Groups of 20 Memories each. For added convenience, you also get a "Quick Memory" and a "Home Channel" on each band, plus ten pairs of band-limit memories, to let you restrict operation to a sub-band, if you like.
Digital Signal Processing (option) For superior interference rejection and transmitter "talk power," the FT-857s optional DSP circuitry enhances both sides of the communications circuit. The FT-857s DSP Unit features a 24-bit high-tech D/A chip for signal processing. Included are Bandpass Filter, Auto-Notch, and Noise Reduction filters, along with a Microphone Equalizer.
Big Radio Tuning Dial and Outstanding Ergonomics Ease of operation of the FT-857 is enhanced by the large-diameter (1.7") Main Tuning Dial, similar in size to the tuning knob of many base station rigs. Selectable tuning steps of 2 kHz/4 kHz per revolution allow easy navigation around your favorite bands, while important keys and switches are strategically placed around the front panel for quick access.
relais reinigen Er is een functie ingebouwd waarmee het mogelijk is om de relais te reinigen. Nou ja, dan gaan de relais een aantal keer achter elkaar open en dicht om plakken van de contacten te voorkomen. Het kan geen kwaad om deze functie eens in de zoveel tijd het werkt te laten doen.
1. Indien de zendontvanger aan staat, schakel deze dan uit; 2. Houd knop [UP] en [DOWN] ingedrukt en druk vervolgens op de [PWR] knop om de zendontvanger in te schakelen; 3. De relais gaan nu schakelen en "RELAY CLEANING" verschijnt op het scherm; 4. De zendontvanger is nu weer klaar voor gebruik.
|
Het aanbieden van de kennis via deze website kost tijd, energie en geld. Het is heel leuk om kennis te kunnen delen en anderen hiermee te kunnen helpen, maar ook alle kosten worden uit privé middelen voldaan. Er zijn onder andere kosten voor de hosting aanbieder om de site te kunnen laten bestaan. Mijn doel is om de inhoud aan te kunnen blijven bieden zonder reclame, maar de kosten worden hoger waardoor financiële middelen nodig zijn. Dus een bijdrage van €3 wordt zeer op prijs gesteld. Het is mogelijk om op een veilige manier een financiële bijdrage van €3 (of een veelvoud hiervan) te kunnen leveren. Klik op de knop hieronder om via Ko-fi een donatie te verzorgen.
|
Het (voort)bestaan van deze website wordt mede mogelijk gemaakd door aanbieden van onderstaande reclame.
|
|